Hyjet 2P-HMV Series

The Hyjet 2P‑HMV Series is built as a dual‑pump booster unit, ideal for residential, agricultural, industrial, or commercial settings requiring consistent water pressure. These systems are commonly used in irrigation, mains pressure boosting, tank-to-tap supply, and general plumbing systems.

Ideal Applications

• Automated tank-to-home pressure delivery

• Lawn/garden irrigation with variable demand

• Commercial plumbing where multiple outlets might operate simultaneously

• Industrial cooling/cleaning systems requiring pressure boosting

Highlights and Benefits:

• Dynamic Pressure Consistency
  Thanks to twin pumps and VSD integration, the system maintains steadier output pressure and avoids cycling—enhancing performance and component lifespan .

• Energy Efficiency
  VSDs allow pumps to run exactly to demand, cutting energy use, reducing wear, and smoothing system operation.

• Robust Build
  Designed with SS manifolds, galvanised steel framing, vibration dampers, and IP55-rated controls, the units deliver strong durability and low maintenance

• Customisable Configurations
  Choose single- or three-phase power, VSD model (E1 to E385), and opt for pressure tanks ranging from 8 L to 100 L—tailored to specific needs

• Certification and Compliance
  Units are suitable for potable water (AS4020) and backed by a standard 2‑year warranty

• Dual vertical multistage HMV pumps: Mounted in parallel on a galvanised steel base, with stainless steel suction and delivery manifolds—threaded for pressure tank connections

The Hyjet 2P‑HMV Series smartly combines twin multistage pumps, advanced VSD control, and rugged construction—delivering efficient, reliable, and easy-to-operate water pressure solutions. Its modular flexibility, energy-saving potential, and potable‑water suitability make it a strong choice for both residential and commercial booster applications.

• Control box with main switches (one for each pumping unit) to switch off the system, in IP55 insulation grade.
• 2 x VSD directly mounted on board of the pumps with pre-set parameters in accordance with the connected pump; available solution with E1 VSD (for pumps up to 2kW with single phase input voltage) or with E109 – E385 VSD (single phase input voltage up to 3 kW and with three-phase input voltage up to 45 kW.

• 2 x HMV Series vertical multistage electric pumps.
• Stainless steel suction and delivery manifolds, with threaded outlets for pressure sensors and pressure tanks.
• Unit base and support for control panel in galvanised steel.
• One check valve for each electric pump, installed on the delivery side.
• Ball valves with pipe union installed on the suction side and delivery side of each electric pump.
• One pipe stub for each electric pump, installed on the suction side.
• Pressure gauge with radial connection.
• 2 x E Series VSD with set parameters in accordance with the connected pump.
• Pressure sensor connected on the output manifold and electrically connected to VSD.
• On request: Pressure tanks 8 litre – 100 litre.

Pressure sensors & protection gear:

• Built-in pressure sensors tied to VSDs enable dynamic pump control.
• Check valves, ball valves, pipe stubs, and suspension fittings are all included.
• Units arrive preset for ease of commissioning

• Control box with main switches (one for each pumping unit) to switch off the system, in IP55 insulation grade.
• 2 x VSD directly mounted on board of the pumps with pre-set parameters in accordance with the connected pump; available solution with E1 VSD (for pumps up to 2kW with single phase input voltage) or with E109 – E385 VSD (single phase input voltage up to 3 kW and with three-phase input voltage up to 45 kW.

• 2 x HMV Series vertical multistage electric pumps.
• Stainless steel suction and delivery manifolds, with threaded outlets for pressure sensors and pressure tanks.
• Unit base and support for control panel in galvanised steel.
• One check valve for each electric pump, installed on the delivery side.
• Ball valves with pipe union installed on the suction side and delivery side of each electric pump.
• One pipe stub for each electric pump, installed on the suction side.
• Pressure gauge with radial connection.
• 2 x E Series VSD with set parameters in accordance with the connected pump.
• Pressure sensor connected on the output manifold and electrically connected to VSD.
• On request: Pressure tanks 8 litre – 100 litre.

• Control box with main switches (one for each pumping unit) to switch off the system, in IP55 insulation grade.
• 2 x VSD directly mounted on board of the pumps with pre-set parameters in accordance with the connected pump; available solution with E1 VSD (for pumps up to 2kW with single phase input voltage) or with E109 – E385 VSD (single phase input voltage up to 3 kW and with three-phase input voltage up to 45 kW.

• 2 x HMV Series vertical multistage electric pumps.
• Stainless steel suction and delivery manifolds, with threaded outlets for pressure sensors and pressure tanks.
• Unit base and support for control panel in galvanised steel.
• One check valve for each electric pump, installed on the delivery side.
• Ball valves with pipe union installed on the suction side and delivery side of each electric pump.
• One pipe stub for each electric pump, installed on the suction side.
• Pressure gauge with radial connection.
• 2 x E Series VSD with set parameters in accordance with the connected pump.
• Pressure sensor connected on the output manifold and electrically connected to VSD.
• On request: Pressure tanks 8 litre – 100 litre.

1 x VSD directly mounted on board of the pumps with pre-set parameters in accordance to the connected pump; available solution with E1 VSD (for pumps up to 2kW with single phase input voltage) or with E109 – E385 VSD (single phase input voltage up to 3 kW and three phase input voltage up to 45 kW.

• 2 x HMV Series vertical multistage electric pumps.
• Stainless steel suction and delivery manifolds, with threaded outlets for pressure sensors and pressure tanks.
• Unit base and support for control panel in galvanised steel.
• One check valve for each electric pump, installed on the delivery side.
• Ball valves with pipe union installed on the suction side and delivery side of each electric pump.
• One pipe stub for each electric pump, installed on the suction side.
• Pressure gauge with radial connection.
• 2 x E Series VSD with set parameters in accordance with the connected pump.
• Pressure sensor connected on the output manifold and electrically connected to VSD.
• On request: Pressure tanks 8 litre – 100 litre.