Slider

TISSEL-200

TS2 5CR-200

Pumps with inverter

Download TISSEL-200 Series Brochure.pdf

DESCRIPTION

  • TISSEL 200 are compact pumping units consisting of one centrifugal waterpump coupled with a variable speed device (inverter) with an external pressure sensor to be placed in a place inside the system.
  • Sturdy and simple to use, TISSEL 200 is ideal to keep always constant pressure inside system regardless variation of utilities.
  • Built-in speed regulator with automatic fan ventilation and IP54 protection. Powered by single-phase alternate tension (230±10% V - 50/60 Hz) it gives an output alternate 3phase tension to run waterpump motor in IE3 class.
  • Smooth start and stop of the pump.
  • Lower wear of the waterpump due to modulation of running speed from the inverter.

  • PROTECTION

  • Dry running
  • Microchip action stops pump after few seconds and try scheduled set restarts to check water availability.

  • Running pressure lower than minimum set running
  • It stops the pump after few seconds

    (i.e. when there is a break in a pipe).

  • Currents-tensions-temperatures
  • It limits currents; it informs whether tenion reaches the allowed limits, it protects from overheating as well as short circuits between the output phases.


    ENERGY SAVINGS

    As it works at variable speed, TISSEL 200 uses only the necessary energy demand required by the system according to the water demand.

    PERFORMANCE CURVE

    TECHNICAL DATA

    MODEL


    Single phase
    POWER
    P2
    ABORPTION
    230 V
    MAX PERFORMANCES PERFORMANCES (ADJUSTABLE SET POINT)
    Q
    l/min
    H
    metres
    Min.Set Point Set Point Stand. Setting Max. Set Point
    kW HP bar l/min bar l/min bar l/min
    TS2-5CR 200 1.8 2.5 IE3 16.0 A 5-200 72-22 2.60 5-185 4.60 5-133 6.50 5-56