TOP-MULTI Series

APPLICATION

• The TOP-FLOOR series is suitable for use with clear water that does not contain abrasive particles. Because of their ability to drain water to a level of 2 millimetres above ground level, they are suitable for use in domestic emergencies where a small area must be drained to the lowest possible level.
• Multistage submersible pumps TOP MULTI 1-AD are designed to pump clean liquid, is defined according to standard ISO 22241 asAUS 32 (Aqueous Urea Solution 32.5%).

FEATURES

• 3 m maximum immersion depth
• Maximum liquid temperature +40 °C
• (Maximum liquid temperature +90 °C
• for a maximum of 3 minutes intermittent service)
• Passage of suspended solids up to Ø 2 mm
• Suction down to 2 mm above ground level
• Continuous service S1
• 3 metres maximum immersion depth (with a suffiiently long power cable)
• Maximum liquid temperature +40°C
• Suction down to 25 mm above ground level
• Continuous service S1

CONSTRUCTION

• 1 PUMP BODY Technopolymer
• 2 SUCTION FILTER Technopolymer
• 3 SUCTION PLATE Stainless steel AISI 304 (AISI 316L for LA versions)
• 4 DIFFUSER Technopolymer
• 5 IMPELLER Noryl FE1520PW
• 6 MOTOR CASING Stainless steel AISI 304 (AISI 316L for LA versions)
• 7 MOTOR CASING PLATE Stainless steel AISI 304
• 8 MOTOR SHAFT Stainless steel AISI 431 (AISI 316L for LA versions)
• 9 SHAFT WITH DOUBLE SEAL AND OIL CHAMBER

Technical Data