Hyjet HPC Series

• Starts and stops the pump depending on the opening and closing of the taps
• Stops the pump in case of a water shortage and protects it against dry-running
• Equipped with an automatic restart in case of failure and an anti-jamming function
• Can be installed on surface and submersible pumps
• No need for a pressure tank, check valve, filter or fittings
• Maintenance free

• Stops the pump in case of a water shortage and protects it against dry-running
• Stops the pump and protects the motor in case of overcurrent

The pump must be connected to the main power supply to operate the electrical power supply. (Figure 1).

In case of a water shortage on suction, the device will stop the pump and protect it against dry running.

This malfunctioning is indicated by the red “Failure” LED blinking. In case of the current absorption exceeding 8 Amps
(HPC-PS08) or 10 Amps (HPC-PS10), the device will stop the pump motor and protect it against over-current.

To restore normal operation to the device and the system press the red Restart button. In a temporary blackout, the device will automatically re-arm once the
electricity returns.