Hyjet HHR Series
Application
Automatic Rain/Mains changeover pump system allowing tank water to be used for water supply in preference to mains water.
Quality-proven electronic pressure controller that automatically starts the pump when there is demand for water supply. The pressure controller will only operate the pump if the tank water is available.
- Automatically switch to mains water when tank water is empty and in case of power failure. The HYJET HHR SERIES does not require an in-tank float switch, making the system quick and easy to install.
- Mains pressure of 200 kPa
Features
- Electronic Controller with run-dry protection
- No in-tank float switch
- Quick & Easy to install
- AS/NZS 4020 Compliant for drinking water contact
- Suitable for single & double storey homes
(UP TO 4 OUTLETS TOILETS & LAUNDRY ONLY) - Automatically switches to mains in case of power failure
- Watermarked dual check valve for backflow prevention
Construction
- Pump body: AISI 304 Stainless steel
- Impeller: Stainless steel
- Motor Shaft: Stainless steel
- Mech seal: Ceramic / Graphite / NBR
Installation Guide
Performance
Technical Data
Dimensions
Application
Automatic Rain/Mains changeover pump system allowing tank water to be used for water supply in preference to mains water.
Quality-proven electronic pressure controller that automatically starts the pump when there is demand for water supply. The pressure controller will only operate the pump if the tank water is available.
- Automatically switch to mains water when tank water is empty and in case of power failure. The HYJET HHR SERIES does not require an in-tank float switch, making the system quick and easy to install.
- Mains pressure of 200 kPa
Features
- Electronic Controller with run-dry protection
- No in-tank float switch
- Quick & Easy to install
- AS/NZS 4020 Compliant for drinking water contact
- Suitable for single & double storey homes
(UP TO 4 OUTLETS TOILETS & LAUNDRY ONLY) - Automatically switches to mains in case of power failure
- Watermarked dual check valve for backflow prevention
Construction
- Pump body: AISI 304 Stainless steel
- Impeller: Stainless steel
- Motor Shaft: Stainless steel
- Mech seal: Ceramic / Graphite / NBR
Installation Guide
Performance
Technical Data
Features
- Automatic pressure controller (Start & Stop on demand)
- Run dry protection
- Quick & Easy to install
- Efficient in power consumption
Construction
- Pump casing: Stainless steel AISI 304
- Motor shaft: Stainless steel AISI 304
- Impellers: Technopolymer
- Diffuser: Technopolymer
- Double mechanical seal: silicon carbide – graphite / ceramic – graphite
- Motor IP68
- Cooled motor (by water) of Class F and thermal protection
- Electric power cable HO7RN 5m with 3-pin
Installation Guide
Performance
Technical Data
